You are Here: Adchem Home»Products»7511-80-54

Quick Links

Associations
Certifications
FAQs
Bonding Studies
Presentations
Printer Friendly Version     Add This   Increase Text Size   Decrease Text Size

Product: 7511-80-54
Product Description:
A 5 mil unsupported permanent acrylic pressure sensitive film cast on a silicone release liner. Ultra-violet has little or no effect on this film adhesive. Initial tack is low enough to permit some repositionability. This product exhibits high ultimate bond.

Product Use:
GENERAL USE: Applications were a high coat weight of an acrylic adhesive is needed for bonding metal and plastic nameplates as well as for joining dissimilar materials where long aging, UV and environmental resistance is needed. Excellent product for bonding rough, irregular or cellular products, i.e. foams, fabrics, embossed metals, and plastics. Ultimate adhesion to most surfaces is excellent. Recommended for use on enamel, metal, glass, wood and a variety of plastics. The use of heat and pressure will help increase the initial bond of 7511 to the substrate. Surfaces to be bonded should be clean, dry, and free of grease, oil, or other foreign matter that will interfere with the bond.

Adhesive Family
7500 High Performance Acrylic Transfer Tape System
Release Liner
80# White Densified Kraft
Carrier/Backing
Not Applicable
Tape Construction
Transfer Tape
Adhesive Liner Side
Acrylic
Adhesive Thickness - Liner Side (Mils)
4.8
Adhesive Exposed Side
Not Applicable
Adhesive Thickness - Exposed Side (Mils)
N/A
Peel Exposed Side
175 Oz/Inch

Note: Typical Values per PSTC #101 Method E, Backed with 2 Mil Aluminum Foil. 24 Hour Dwell.
Peel Liner Side
Oz/Inch

Note: Typical Values per PSTC #101 Method E, Backed with 2 Mil Aluminum Foil. 24 Hour Dwell.
Shear Exposed Side
7 days

Note: Typical Values per PSTC #107 Procedure A Modified, 1000 grams/Sq.Inch @ 72oF. 1 Minute Maximum Dwell.
Shear Liner Side
days

Note: Typical Values per PSTC #107 Procedure A Modified, 1000 grams/Sq.Inch @ 72oF. 1 Minute Maximum Dwell.
Service Temperature
-30 °F to 220 °F

Note: Data is based on limited testing and under no load.
Roll Weight

Note: Theoretical number only. The actual roll weight may vary.
Tape Thickness (without release liner)

Note: Theoretical number only. Does not include Release Liner. The actual Tape thickness may vary.
Related Products
SDS Note: If the specific product is not listed in the appendix of the provided "Article Exemption Letter", please contact your sales/account representative for a SDS.





Materials Exposed Side
 Materials Liner Side
Not the product you are looking for?. Need to search for something else? Click to run a new search.
Disclaimer: The above information has been provided as a general guidance to assist in preliminary identification of potential products and adhesive systems. Data presented are typical properties taken from a limited number of laboratory tests and should not be used for specification purposes. All products are sold with the understanding that purchasers will be solely responsible for determining the suitability of the materials for any purpose. Berry Global makes no warranties, either express or implied including any implied warranties of merchantability or fitness for use regarding the product information herein.

Berry Global continues to seek ways to assist you in your adhesive selections for a wide variety of materials available on the market. If we can assist you with any further testing or screening to help you select the best Adchem adhesive system or Product for your application please do not hesitate to contact our Technical Service Department or your Sales Representative.