Product Description:
A 4.5-mil high initial tack, unsupported acrylic permanent pressure-sensitive film, cast on a silicone-sensitive release liner.
Product Use:
This product was developed for use primarily for Low Surface Energy (LSE) bonding. The high performance Acrylic Adhesive provides bonding to a wide variety of LSE materials and many types of foams including Urethane. Exhibits excellent peel and shear properties.
Adhesive Family
650 High Performance Acrylic Adhesive Adhesive System for LSE bonding
Release Liner
74# White Polycoated Kraft
Carrier/Backing
Not Applicable
Tape Construction
Transfer Tape
Adhesive Liner Side
Acrylic
Adhesive Thickness - Liner Side (Mils)
4.5
Adhesive Exposed Side
Not Applicable
Adhesive Thickness - Exposed Side (Mils)
N/A
Peel Exposed Side
Oz/Inch
Note: Typical Values per PSTC #101 Method E, Backed with 2 Mil Aluminum Foil. 24 Hour Dwell.
Peel Liner Side
180
Oz/Inch
Note: Typical Values per PSTC #101 Method E, Backed with 2 Mil Aluminum Foil. 24 Hour Dwell.
Shear Exposed Side
days
Note: Typical Values per PSTC #107 Procedure A Modified, 1000 grams/Sq.Inch @ 72oF. No Dwell.
Shear Liner Side
7
days
Note: Typical Values per PSTC #107 Procedure A Modified, 1000 grams/Sq.Inch @ 72oF. No Dwell.
Service Temperature
-30
°F to
375
°F
Note: Data is based on limited testing and under no load.
Roll Weight
Note: Theoretical number only. The actual roll weight may vary.
Tape Thickness (without release liner)
Note: Theoretical number only. Does not include Release Liner. The actual Tape thickness may vary.
SDS Note: If the specific product is not listed in the appendix of the provided "Article Exemption Letter", please contact your sales/account representative for a SDS.
Bonding Study Results
Manufacturer |
Material Description | Bonding Result | Notes/Comments |