Printer Friendly Version     Add This   Increase Text Size   Decrease Text Size

Product: 5944M-74-54

Product Description:
A high tack, low dead load acrylic adhesive coated 1.5 mils on the exposed side of a 1/2 mil polyester film. On the user side is a 1.3 mil rubber-based adhesive, which exhibits excellent tack, high peel strength and moderate shear.

Product Use:
5944M works well with some PVC and neoprene closed cell rubber products; also with cork and rubber composites as well as with many urethane foams. This product offers the advantages of an acrylic laminating adhesive on one side of a polyester film and a synthetic rubber based adhesive on the end user's side. The polyester carrier offers excellent dimensional stability for die cutting.
GENERAL USE: This product is engineered to bond to most foams, sponges, and rubbers.

Adhesive Family
5900 Universal Foam Bonding Tape System
Release Liner
74# White Polycoated Kraft
Carrier/Backing
1/2 mil Clear Polyester Film
Tape Construction
Double Coated PET Film Tape
Adhesive Liner Side
Rubber
Adhesive Thickness - Liner Side (Mils)
1.3
Adhesive Exposed Side
Acrylic
Adhesive Thickness - Exposed Side (Mils)
1.5
Peel Exposed Side
209 Oz/Inch

Note: Typical Values per PSTC #101 Method C, Backed with 2 Mil Aluminum Foil. 24 Hour Dwell
Peel Liner Side
205 Oz/Inch

Note: Typical Values per PSTC #101 Method C, Backed with 2 Mil Aluminum Foil. 24 Hour Dwell
Shear Exposed Side
10 days

Note: Typical Values per PSTC #107 (Modified) 1” x 1” x 500 gm/Sq.in. @ 72 Degree F
Shear Liner Side
7 days

Note: Typical Values per PSTC #107 (Modified) 1” x 1” x 500 gm/Sq.in. @ 72 Degree F
Service Temperature
30 °F to 150 °F

Note: Data is based on limited testing and under no load.
Roll Weight

Note: Theoretical number only. The actual roll weight may vary.
Tape Thickness (without release liner)

Note: Theoretical number only. Does not include Release Liner. The actual Tape thickness may vary.
Related Products
SDS Note: If the specific product is not listed in the appendix of the provided "Article Exemption Letter", please contact your sales/account representative for a SDS.


Bonding Study Results

Manufacturer Material DescriptionBonding ResultNotes/Comments
Armacell Armacell MB1 – Neoprene Blend Very Good
Armacell Armacell 1G1 – Neoprene Blend Very Good
Biltrite 80 Durometer Neoprene Rubber (TS 2514) Fair
Cell-Aire Cell-Aire CA 20 PE Foam (TS 2533) Good
Cell-Aire Cell-Aire CA 30 PE Foam (TS 2533) Good
Cell-Aire Cell-Aire CA 90 PE Foam (TS 2533) Very Good
Cell-Aire Cell-Aire CA 185 PE Foam (TS 2533) Excellent (Foam Tear)
Cell-Aire Cell-Aire CA 250 PE Foam (TS 2533) Very Good
Cellect Cellect EVA-4 (TS 2533) Excellent (Foam Tear)
Cellect Cellect EVA-6 (TS 2533) Good
Cellect Cellect T-4 (TS 2533) Excellent (Foam Tear)
Cellect Cellect T-12 (TS 2533) Excellent (Foam Tear)
Composition Cork (TS 2608) Good
EPDM Blend (TS 2919) Fair
EPDM/Neoprene Rubber (TS 2879) Good
Epichlorohydrin Sponge (TS 2432) Fair
Flexible Highly Plasticized Vinyl (TS 2810) Very Good
HyPUR-cel® HyPUR-cel® T0805 (TS 2550) Excellent
HyPUR-cel® HyPUR-cel® T0812 (TS 2550) Good
HyPUR-cel® HyPUR-cel® T1505 (TS 2550) Excellent
HyPUR-cel® HyPUR-cel® T1515 (TS 2550) Excellent
Monarch Monarch Rubber 3091 Pure EPDM Excellent (Foam Tear)
Monarch Monarch Rubber 4051 Epichlorohydrin Excellent (Foam Tear)
Monarch Monarch Rubber 5013 EPDM-CR-SBR Blend Excellent (Foam Tear)
Monarch Monarch Rubber 5031 EPDM-CR-SBR Blend Excellent (Foam Tear)
Monarch Monarch Rubber 5032 EPDM-CR-SBR Blend Excellent (Foam Tear)
Monarch Monarch Rubber 6071 NBR/PVC Industrial Excellent (Foam Tear)
Open Cell Sponge SBR Rubber (TS 2907) Fair
Rogers Corporation PORON® (TS 2947) Excellent
Rebonded Neoprene (TS 2608) Good
Rebonded Polyurethane (TS 2608) Good
Rebonded Vinyl (TS 2608) Very Good
White Rigid PVC (TS 2988) Very Good
Wm. T. Burnett Wm. T. Burnett SEN - 2# UL Ether Fair
Wm. T. Burnett Wm. T. Burnett HB - 1650R 1.6# Ether Fair
Wm. T. Burnett Wm. T. Burnett EMR-1 - 1.5# Ether Fair
Wm. T. Burnett Wm. T. Burnett 4LBN - 4.0# UL Ester Fair
Wm. T. Burnett Wm. T. Burnett 6LBN - 6.0# UL Ester Fair



Tested Industry Specifications
Specification Type Specification Description Notes
Chrysler Chrysler MS-CC211 Change: G
Delphi Delphi DX650017 (3/99) Type II
Ford Ford ESA-M11P19-A
Ford Ford ESB-M3G76-B2
Ford Ford ESB-M11P8-A
Ford Ford EST-M3G76-A
Ford Ford WSF-M11P8-A2
General Motors General Motors GM3622M Type I
General Motors General Motors GM3622M (11/93) Type IV Cycle E
General Motors General Motors GM3607M (12/97) Type I
Materials Exposed Side
Materials Liner Side
Not the product you are looking for?. Need to search for something else? Click to run a new search.

Disclaimer: The above information has been provided as a general guidance to assist in preliminary identification of potential products and adhesive systems. Data presented are typical properties taken from a limited number of laboratory tests and should not be used for specification purposes. All products are sold with the understanding that purchasers will be solely responsible for determining the suitability of the materials for any purpose. Berry Global makes no warranties, either express or implied including any implied warranties of merchantability or fitness for use regarding the product information herein.

Berry Global continues to seek ways to assist you in your adhesive selections for a wide variety of materials available on the market. If we can assist you with any further testing or screening to help you select the best Adchem adhesive system or Product for your application please do not hesitate to contact our Technical Service Department or your Sales Representative.