Product Description:
The product is constructed with a high tack, heat resistant, aggressive rubber adhesive 1.8 mils coated on the liner side along with a high heat resistant acrylic adhesive 1.3 mils coated to the exposed side of a 0.5 mil polyester film. The Exposed side adhesive also contains a biostatic additive, which aids in meeting the requirements for product that are resistant to microbial growth.
Product Use:
The exposed side of the tape forms excellent bonds to a variety of ether, ester and low perm urethane foams. The liner side adhesive is designed to adhere to low-energy surfaces including talc-filled polypropylene and mica-filled nylon. Exposed adhesive may need some low to moderate heat to bond to some foam substrates.
Adhesive Family
4300 High Perfomance Foam Bonding Tape System
Release Liner
12pt Natural Polycoated Kraft
Carrier/Backing
1/2 mil Clear Polyester Film
Tape Construction
Double Coated PET Film Tape
Adhesive Liner Side
Rubber
Adhesive Thickness - Liner Side (Mils)
1.8
Adhesive Exposed Side
Acrylic
Adhesive Thickness - Exposed Side (Mils)
1.3
Peel Exposed Side
50
Oz/Inch
Note: Typical Values per PSTC #101 Method C, Backed with 1 Mil Polyester. 24 Hour Dwell
Peel Liner Side
130
Oz/Inch
Note: Typical Values per PSTC #101 Method C, Backed with 1 Mil Polyester. 24 Hour Dwell
Shear Exposed Side
7
days
Note: Typical Values per PSTC #107; Procedure A, Modified, 1000 gm/sq. in. @ 72 Deg.F. 15 minute maximum dwell.
Shear Liner Side
7
days
Note: Typical Values per PSTC #107; Procedure A, Modified, 1000 gm/sq. in. @ 72 Deg.F. 15 minute maximum dwell.
Service Temperature
30
°F to
180
°F
Note: Data is based on limited testing and under no load.
Roll Weight
0.659 lbs/sq yards
Note: Theoretical number only. The actual roll weight may vary.
Tape Thickness (without release liner)
3.6 mils
Note: Theoretical number only. Does not include Release Liner. The actual Tape thickness may vary.
SDS Note: If the specific product is not listed in the appendix of the provided "Article Exemption Letter", please contact your sales/account representative for a SDS.